DC 3V-6V bis 400kV 400000V Boost Step up Power Module High Voltage Generator
Input voltage: DC 3V-7.2VInput current: 2A-5AHigh voltage type: pulse current typeOutput voltage: about 200,000V (please pay attention to safety when using)High voltage bipolar discharge distance: 10mm-20mmOutput high voltage line length: about 1 00mmLength of input power cable: about 100mm (red line is positive) .Dimensions: φ 24*6 4mmWiring: the red line is the positive pole of the power supply. The output is twohigh temperature and high pressure resistant silica gel wiresAbout power supply: can use a single 3.7V lithium battery or two in series, suchas 1 8650 battery, idle mobile phone battery (to remove the protection plate, therecommended capacity of more than 2000mAh) or nickel-cadmium/ni-MH batterypack, 4V or 6V lead-acid battery, etc.
Real Electronics
Category List
All products
- Input voltage: DC 3V-7.2V
- Input current: 2A-5A
- High voltage type: pulse current type
- Output voltage: about 200,000V (please pay attention to safety when using)
- High voltage bipolar discharge distance: 10mm-20mm
- Output high voltage line length: about 1 00mm
- Length of input power cable: about 100mm (red line is positive) .
- Dimensions: φ 24*6 4mm
- Wiring: the red line is the positive pole of the power supply. The output is two
- high temperature and high pressure resistant silica gel wires
- About power supply: can use a single 3.7V lithium battery or two in series, such
- as 1 8650 battery, idle mobile phone battery (to remove the protection plate, the
- recommended capacity of more than 2000mAh) or nickel-cadmium/ni-MH battery
- pack, 4V or 6V lead-acid battery, etc.
DC 3V-6V Bis 400kV 400000V Boost Step Up Power Module High Voltage Generator
250 BDT
- Input voltage: DC 3V-7.2V
- Input current: 2A-5A
- High voltage type: pulse current type
- Output voltage: about 200,000V (please pay attention to safety when using)
- High voltage bipolar discharge distance: 10mm-20mm
- Output high voltage line length: about 1 00mm
- Length of input power cable: about 100mm (red line is positive) .
- Dimensions: φ 24*6 4mm
- Wiring: the red line is the positive pole of the power supply. The output is two
- high temperature and high pressure resistant silica gel wires
- About power supply: can use a single 3.7V lithium battery or two in series, such
- as 1 8650 battery, idle mobile phone battery (to remove the protection plate, the
- recommended capacity of more than 2000mAh) or nickel-cadmium/ni-MH battery
- pack, 4V or 6V lead-acid battery, etc.